Full Service Bed Bug Extermination

See below for heat treatment options and call us for a quote.

Looking to save money? Click HERE

We are New England’s Only Bed Bug DIY Heater Rental Company. Rent the same heaters that we use and perform your own treatment for a fraction of the cost.

LEARN MORE
Why Heat? Click HERE

Heat Treatments Are the Most Effective Way to Kill Bed Bugs

  • Kills all life stages of bed bugs—adults, nymphs, and eggs—with one treatment
  • Non-chemical, non-toxic approach penetrates wall cavities, mattresses and other hard to reach areas
  • No odor
  • Treated in 24 hours
  • No damage to contents in the properly prepared infested room
LEARN MORE
Why Debug Your Bed? Click HERE
  • 100’s of successful heat treatments
  • Fully Insured
  • Professional and courteous
  • Empathetic – we really do care!
  • Family owned and operated
LEARN MORE

New England Heat Treatment Options

FS1

For a single treatment area up to 400sqft. Square footage is determined by a number of factors such as length time width, size of closets and attached bathrooms, ceiling height, insulation quality, etc. Areas with multiple rooms will require additional equipment which may increase the treatment cost.

SERVICE INCLUDES:

Everything required to perform a successful heat treatment.  Treatment takes between 20 and 24 hours and may require you to leave the premise. Additional fees may apply for customers outside of a 45 mile radius from 03046.

Power Needed: 

  • 4 x 20amp 120v circuits OR
  • 4 x 15amp 120v circuits OR
  • 8 x 15amp 120v circuits OR
  • 1 x 30am 220v circuit (from an electric stove or dryer) OR
  • A combination of the above

Total Amps Needed: 48 – 96

BTUs: 20,000 – 46,000

*Please note that all prices are subject to change.

FS2

For one or two treatment areas up to a total of 600sqft. Square footage is determined by a number of factors such as length time width, size of closets and attached bathrooms, ceiling height, insulation quality, etc. Areas with multiple rooms will require additional equipment which may increase the treatment cost.

SERVICE INCLUDES:

Delivery, setup, treatment, monitoring and pick-up.  Treatment takes between 20 and 24 hours and may require you to leave the premise. Additional fees may apply for customers outside of a 45 mile radius from 03046.

Power Needed: 

  • 8 x 20amp 120v circuits OR
  • 8 x 15amp 120v circuits OR
  • 2 x 30am 220v circuit (from an electric stove or dryer) OR
  • a combination and variation of the above

Total Amps Needed: 96 – 110

BTUs: 40,000 – 46,000

*Please note that all prices are subject to change.

FS3

For one, two or three treatment areas up to a total of 800sqft. Square footage is determined by a number of factors such as length time width, size of closets and attached bathrooms, ceiling height, insulation quality, etc. Areas with multiple rooms will require additional equipment which may increase the treatment cost.

SERVICE INCLUDES:

Delivery, setup, treatment, monitoring and pick-up.  Treatment takes between 20 and 24 hours and may require you to leave the premise. Additional fees may apply for customers outside of a 45 mile radius from 03046.

Power Needed: 

  • 8 x 20amp 120v circuits OR
  • 8 x 15amp 120v circuits OR
  • 2 x 30am 220v circuit (from an electric stove or dryer) OR
  • a combination and variation of the above

Total Amps Needed: 96 – 144

BTUs: 40,000 – 66,000

*Please note that all prices are subject to change.

FS4

For one to four treatment areas up to a total of 1000sqft. Square footage is determined by a number of factors such as length time width, size of closets and attached bathrooms, ceiling height, insulation quality, etc. Areas with multiple rooms will require additional equipment which may increase the treatment cost.

SERVICE INCLUDES:

Delivery, setup, treatment, monitoring and pick-up.  Treatment takes between 20 and 24 hours and may require you to leave the premise. Additional fees may apply for customers outside of a 45 mile radius from 03046.

Power Needed: 

  • 12 x 20amp 120v circuits OR
  • 12 x 15amp 120v circuits OR
  • 2 x 30am 220v circuit (from an electric stove or dryer) OR
  • a combination and variation of the above

Total Amps Needed: 144 – 192

BTUs: 60,000 – 78,000

*Please note that all prices are subject to change.

FS-CAR

For treating most size vehicles. Vehicle must be de-cluttered by the customer prior to treatment and brought to our place of business. Additional fees may apply if customer wants the vehicle treated at their location.

SERVICE INCLUDES:

Setup, treatment, and monitoring.  Treatment takes between 6 and 8 hours. You must leave the vehicle on our premise and return the same day the treatment is completed.

Power Needed: 

  • 3 x 20amp 120v circuits OR
  • 3 x 15amp 120v circuits OR
  • 1 x 30am 220v circuit (from an electric stove or dryer) OR
  • a combination and variation of the above

Total Amps Needed: 34

BTUs: 16,000

*Please note that all prices are subject to change.

FS-VAN

The FS VAN Bed Bug package is designed to treat the contents of a moving van. The van cannot be completely packed – there must be room for equipment and air flow. Contents inside of boxes may not reach lethal temperatures. This treatment is best for large items such as couches, mattresses, box springs, etc.

SERVICE INCLUDES:

Setup, treatment, and monitoring.  Treatment takes between 6 and 8 hours. You must leave the vehicle on our premise and return the same day the treatment is completed.

Additional fees may apply if customer wants the vehicle treated at their location.

Power Needed: 

  • 4 x 20amp 120v circuits OR
  • 4 x 15amp 120v circuits OR
  • 1 x 30am 220v circuit (from an electric stove or dryer) OR
  • a combination and variation of the above

Total Amps Needed: 48

BTUs: 20,000

*Please note that all prices are subject to change.

FS-RV

The FS RV Bed Bug package is designed to treat the contents of an RV under 25′ long. The RV cannot be completely packed – there must be room for equipment and air flow. Contents inside of boxes may not reach lethal temperatures. This treatment works best when the contects have been removed prior to treatment.

SERVICE INCLUDES:

Setup, treatment, and monitoring.  Treatment takes between 6 and 8 hours. You must leave the vehicle on our premise and return the same day the treatment is completed.

Additional fees may apply if customer wants the vehicle treated at their location.

Power Needed: 

  • 4 x 20amp 120v circuits OR
  • 4 x 15amp 120v circuits OR
  • 1 x 30am 220v circuit (from an electric stove or dryer) OR
  • a combination and variation of the above

Total Amps Needed: 48

BTUs: 20,000

*Please note that all prices are subject to change.

FS-RV-25+

The FS RV Bed Bug package is designed to treat the contents of an RV 25′ long or longer. The RV cannot be completely packed – there must be room for equipment and air flow. Contents inside of boxes may not reach lethal temperatures. This treatment works best when the contects have been removed prior to treatment.

SERVICE INCLUDES:

Setup, treatment, and monitoring.  Treatment takes between 6 and 8 hours. You must leave the vehicle on our premise and return the same day the treatment is completed.

Additional fees may apply if customer wants the vehicle treated at their location.

Power Needed: Amps  and BTUs Needed will vary based on RV size and floor plan.

*Please note that all prices are subject to change.

FS-Tractor

The FS Tractor Bed Bug package is designed to treat the contents of a semi truck (tractor). The tractor cannot be completely packed – there must be room for equipment and air flow. Contents inside of boxes may not reach lethal temperatures. This treatment works best when the contents have been removed prior to treatment.

SERVICE INCLUDES:

Setup, treatment, and monitoring.  Treatment takes between 6 and 8 hours when a propane heater is used or 12-18 hours when an electric heater is used. Electric treatments are only possible if adequate electrical power is available within 25 feet of the tractor.

Power Needed For an Electric Heat Treatment: 

  • 4 x 20amp 120v circuits OR
  • 4 x 15amp 120v circuits OR
  • 1 x 30am 220v circuit (from an electric stove or dryer) OR
  • a combination and variation of the above

Total Amps Needed: 48

BTUs: 20,000

Power Needed For a Propane Heat Treatment: 

  • 1 x 20amp 120v circuits OR
  • 1 x 15amp 120v circuits OR

Total Amps Needed: 15

*Please note that all prices are subject to change.

FSpro

Propane heat treatment for treating an entire apartment, house, office, or space that can’t be treated with our electric heaters. Square footage range is between 700 and 5,500.

SERVICE INCLUDES:

Delivery, setup, treatment, on-site monitoring and pick-up. In most cases, treatment time is an 8 hour period during the day and requires you to leave the premise. Additional fees may apply for customers outside of a 45 mile radius from 03046.

Cost is on a per square foot basis and is calculated using the square footage of treatment area.

Power Needed: 

  • 1 x 15amp or 20amp 120v circuits
  • 40 Gallons of Propane (included)

Total Amps Needed: 15

BTUs: 300,000 – 900,000

*Please note that all prices are subject to change.

Looking to save money?

We are New England’s Only Bed Bug DIY Heater Rental Company. Rent the same heaters that we use and perform your own treatment for a fraction of the cost. Click HERE to learn more.

Are you a hotel manager?

We offer discreet hotel room and suite heat treatments for bed bugs. Click HERE to learn more.